Disk as installed in machine :
Cylinders Approx
Partition Status Type Start End Length % MB
========= ====== =========== ===== === ====== === ======
1 Active DOS 0 2046 2047 50 2047.3
2 Other 2047 4132 2086 50 2086.6
SELECT ONE OF THE FOLLOWING:
0. Overwrite system master boot code
1. Create a partition
2. Change Active (Boot from) partition
3. Delete a partition
4. Exit (Update disk configuration and exit)
5. Cancel (Exit without updating disk configuration)
Enter Selection: 5
***** Deleted both partitions, and created 1 new one. Full unix. *****
Disk after changing partitions :
Cylinders Approx
Partition Status Type Start End Length % MB
========= ====== =========== ===== === ====== === ======
1 Active UNIX System 0 4133 4134 100 4134.0
SELECT ONE OF THE FOLLOWING:
0. Overwrite system master boot code
1. Create a partition
2. Change Active (Boot from) partition
3. Delete a partition
4. Exit (Update disk configuration and exit)
5. Cancel (Exit without updating disk configuration)
Enter Selection: 4
Surface analysis of your disk is recommended
but not required.
Do you wish to skip surface analysis? (y/n) n
Checking for bad sectors in the UNIX System partition...
Verify (UNIX partition only) /dev/rdsk/c1b0t1d0s0:
Begin Verify (No more than 283 minutes)
You will now be queried on the setup of your disk.After you
have determined which slices will be created, you will be
queried to designate the sizes of the various slices.
How many slices/filesystems do you want created on the disk (1 - 13)? 2
Please enter the absolute pathname (e.g., /home3) for
slice/filesystem 1 (1 - 32 chars)? /usr1
Enter the filesystem type for this slice (vxfs,ufs,s5,sfs),
type 'na' if no filesystem is needed, or press
<ENTER> to use the default (vxfs): vxfs
Specify the block size from the the following list
(1024, 2048, 4096, 8192), or press <ENTER> to use the first one: 1024
Should /usr1 be automatically mounted during a reboot?
Type "no" to override auto-mount or press <ENTER> to enable the option: yes
Please enter the absolute pathname (e.g., /home3) for
slice/filesystem 2 (1 - 32 chars)? /usr3
Enter the filesystem type for this slice (vxfs,ufs,s5,sfs),
type 'na' if no filesystem is needed, or press
<ENTER> to use the default (vxfs): vxfs
Specify the block size from the the following list
(1024, 2048, 4096, 8192), or press <ENTER> to use the first one: 1024
Should /usr3 be automatically mounted during a reboot?
Type "no" to override auto-mount or press <ENTER> to enable the option: yes
You will now specify the size in cylinders of each slice.
(One megabyte of disk space is approximately 1 cylinders.)
There are now 4133 cylinders available on your disk.
The filesystem type you have chosen is limited to 1048576 cylinders.
How many cylinders would you like for /usr1 (0 - 4133)?
Press <ENTER> for 0 cylinders: 2066
There are now 2067 cylinders available on your disk.
The filesystem type you have chosen is limited to 1048576 cylinders.
How many cylinders would you like for /usr3 (0 - 2067)?
Press <ENTER> for 0 cylinders: 2066
Notice: The selections you have made will leave 1 cylinders unused.
You have specified the following disk configuration:
A /usr1 filesystem with 2066 cylinders (2066.0 MB)
A /usr3 filesystem with 2066 cylinders (2066.0 MB)
Is this allocation acceptable to you (y/n)? y
Filesystems will now be created on the needed slices
Creating the /usr1 filesystem on /dev/rdsk/c1b0t1d0s1
Allocated approximately 528864 inodes for this file system. Specify a
new value or press <ENTER> to use the default:
Creating the /usr3 filesystem on /dev/rdsk/c1b0t1d0s2
Allocated approximately 528864 inodes for this file system. Specify a
new value or press <ENTER> to use the default:
UX:diskadd: INFO: Diskadd for Disk Drive 2 DONE at Fri Oct 23 08:48:00 EDT 1998
#